Cart

Added to cart

Go to cart

Your order qualifies for free 2-day shipping and easy returns

LT545RC (Legacy)

Model: Lt545RC
product image

Key Specs

FPGA Performance
Industrial Interface
P-Iris Connector
Onboard memory for frame buffering ensuring reliable images
Locking micro USB3 and Hirose GPI/O connector
Support precise iris lens control
Discontinued

LT Series USB3 Overview

With robust compact enclosures and fully-locking USB3 connectors, the Lt Series USB3 Cameras are built for rugged 24/7 use. Manufactured using the latest rolling shutter Starvis™ CMOS sensors and global shutter Pregius⁾ CMOS sensors from Sony®, and ranging in resolution from 1.7-31 megapixels, these cameras perform in a wide variety of imaging applications such as aerial imaging, Intelligent Traffic Systems (ITS), robotic inspection solutions, and life sciences.

Capturing More Images in Challenging Applications – Traffic and More

Using a high frame rate camera with advanced imaging technology is a must for imaging applications like Intelligent Traffic Systems (ITS). This means as the sun sets, an Lt Series USB3 Camera will be able to accurately capture crucial information such as license plate characters.

Advantages for Outdoor Imaging

Highlights and shadows can be difficult to image in outdoor conditions because of variations in the lighting and can cause vital image data to be lost. The key to ensuring images keep clarity in such conditions is high dynamic range.

Reliable High-Resolution Imaging

For challenging imaging applications where the maximum number of pixels are needed, the Lt Series USB3 Cameras have several high resolution sensor options. Designed for use in hot or cold environments and supporting operating temperatures of 0 to 50 degrees Celsius, the Lt Series USB3 Cameras are suited for industrial applications with its secure USB3 interface with a locking connector. In outdoor applications such as traffic monitoring, these cameras offer reliable color and detail in various weather conditions.

Specifications

Highlighted

Référence
Lt545RC
Résolution
2464 x 2056
Mégapixels
5
Fréquence d’image maximale Standard
75
Fréquence d’image maximale Rafale
93
Modèle de capteur
Sony IMX250
Taille de pixel
3.45
Type de capteur
CMOS
Format du capteur
2/3"
Capteur diagonal
11.1 mm
Type d’obturateur
Global shutter
Spectre
Color
Filtre optique
IR cut-off (650 nm)
Fixation de l'objectif
C-mount
Synchronisation
Image sync: Free-running, software & hardware trigger
Interface de données
USB 3.0 (5.0 Gbps)
Protection
IP40

Caractéristiques

Contrôle de gain
Manual, automatic (AGC)
Équilibre des blancs
Manual, automatic (AWB)
Mémoire Flash
8 MB non-volatile memory
Modes d'acquisition
Continuous / Single Frame
Modes de déclenchement
Hardware and software triggerable
Modes image partiels
ROI
Plage d'exposition
14 µs to 30 seconds
Réglages utilisateur
2 user configuration sets for custom camera settings
Tampon d'images
128 MB
Traitement de l’image
Gamma, lookup table, auto white balance, brightness and contrast

Performance

Bruit noir temporel (bruit de lecture)
2.3
Capacité de saturation (e-)
10400
Courant sombre
1.5 e-/s at 22 °C
Plage de gain
1x to 251x (0 dB to 48 dB)
Plage dynamique en dB
73
QE Bleu
49 @470 nm
QE Rouge
46 @630 nm
QE Vert
59 @525 nm
Seuil de sensibilité absolu (y)
4.7

Physiques

Besoins en alimentation
Power over USB or 5 to 25 V via GPIO connector
Connecteur
USB3 Micro-B (horizontal locking) | Hirose MXR-8R-8SA(71) | 4-pin Lens Iris Control
Consommation électrique [maximum]
4 W
Dimensions [l x H x L]
44 mm x 44 mm x 61 mm
GPIO
Hirose-8 male connector, P-iris 4 pin connector
Humidité de stockage
20 to 80% (no condensation)
Humidité en fonctionnement
5 to 95% (no condensation)
Masse
140 g
Ports E/S non isolés
15 Bi-directional
Ports E/S opto-isolés
1 input, 1 output
Profondeur de bits de la numérisation (ADC)
8-bit, 12-bit
Température de fonctionnement
0 to 50 °C
Température de stockage
-30 to 70 °C

Configuration système recommandée

Accessoires (inclus)
3m USB 3.0 cable
Accessoires requis
Lens, Cable, Host Adapter (USB Port)
Équipement d'alimentation électrique
USB3 Port or External Camera Power Supply
Port
USB3

Conformité et certifications

Conformité
CE, FCC, RoHS, WEEE. The ECCN for this product is: EAR099.
Garantie
3 years

Resources & Support

You must be logged in to download software or firmware. Please sign in or create an account here.

LuCam Software and Software Development Kit (Windows)

Software Download

Version: 6.9.0

Download

Lumenera Camera Software Development Kit (LINUX)

Software Download

Version: 2.4.11

Download

Photo ID Software

Software Download

Download

USB 3.0 Camera Firmware and Updater

Firmware Download

Version: 4.0

Download

ISR and Defense Mission Components Brochure

Brochure

Download

Lt Series USB3 Cameras

Brochure

Last Updated: décembre 03, 2024

Download

Lt545R Datasheet

Datasheet

Download

Lumenera-VSD Innovators Award-Press Release 11042018

Material Composition Product Declaration