Blackfly GigE Overview
Specifications
Highlighted
- Resolution
- 1288 × 964
- Megapixels
- 1.3
- Max Frame Rate Standard
- 30
- Pixel Size
- 3.75
- Lens Mount
- CS-mount
- Sensor Type
- CCD
- Shutter type
- Global shutter
- Sensor Model
- Sharp RJ33J4CAODT
- Data Interface
- Gigabit Ethernet 1 Gbps
- Spectrum
- Mono
- Part Number
- BFLY-PGE-13H2M-CS
Features
- Exposure Range
- 0.049 ms to 32 seconds
- Flash Memory
- 512 KB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 16 MB
- Image Processing
- Gamma, lookup table, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- Triggering Modes
- Standard, bulb, low smear, overlapped, multi-shot
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 8.55
- Dynamic Range dB
- 61.99
- Gain Range
- -5.89 dB to 24 dB
- QE (Mono)
- 70 (% at 525 nm)
- Saturation Capacity (e-)
- 7384
- Temporal Dark Noise (Read Noise)
- 5.37
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm ×30 mm
- Mass
- 36 g
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 45°C (ambient)
- Optical Filter
- None
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 2.5 W
- Power Requirements
- 12 V nominal (5 - 16 V) via GPIO interface
- Sensor Format
- 1/3"
- Storage Humidity
- 20 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Recommended System Configuration
- Port
- Gigabit Ethernet
- Power Sourcing Equipment
- PoE Interface Card / Injector/ Switch or Camera Power Supply (12v 1.5A, 6-pin Hirose)
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v1.2
- Warranty
- 3 years
Resources & Support
Technical Guidance
How to determine and interpret the Bayer Tile pixel format of a camera
Learn moreYou must be logged in to download software or firmware. Please sign in or create an account here.
FlyCapture2 SDK
Spinnaker SDK
BFLY-PGE-03S2 Firmware 1.30.3.0
BFLY-PGE-03S3 Firmware 1.35.3.0
BFLY-PGE-05S2 Firmware 1.32.3.0
BFLY-PGE-09S2 Firmware 1.46.3.0
BFLY-PGE-12A2 Firmware 1.68.3.0
BFLY-PGE-13E4 Firmware 1.46.3.0
BFLY-PGE-13H2 Firmware 1.62.3.0
BFLY-PGE-13S2 Firmware 1.66.3.0
PCN-2013-001A Addition of Plastic Screws for ACC-01-0003
PCN-2013-005A IR Filter Change
PCN-2013-015A Camera and Box Label Change
PCN-2014-002A Blackfly GigE GPIO Change
PCN-2014-005A Logo Improvement
PCN-2015-005A BFLY-PGE-13S2 Frame Rate Improvement
PER-2017-001 Serial Number and FlyCapture2 Compatibility
PCN-2017-002 Point Grey rebranding to FLIR
PCN-2020-001 ICX424 Discontinuation
PCN-2020-002 CCD Camera Phase 2 Discontinuation
Contact Support
Your question may be answered in one of our 300+ Knowledge Base articles. Visit our Support Center and search for your product or the topic you have a question about.
Check out our Community Forum for answers and discussion.
To submit a support ticket, visit our Technical Support Center, or call us at +1-604-242-9937 (select option 2).
To request an RMA, please complete our Return and Repair Request Form.