The new standard for speed.
Specifications
Highlighted
- Resolution
- 4112 x 3008
- Megapixels
- 12.3
- Max Frame Rate Standard
- 49
- Max Frame Rate Burst
- 63
- Max Frame Rate Turbodrive/Lossless Compression
- 63
- Pixel Size
- 3.45
- Lens Mount
- C-mount
- Sensor Type
- CMOS
- Shutter type
- Global shutter
- Sensor Model
- Sony IMX253
- Data Interface
- Gigabit Ethernet 5 Gbps / 2.5 Gbps / 1 Gbps
- Spectrum
- Mono
- Optical Filter
- None
- Part Number
- G5-GM30-M4040
- Synchronization
- Image sync: Free-running, software & hardware trigger, action command, PTP modulo | Timestamp Sync: PTP (IEE1588)
- Protection
- IP40
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 19.4 µs to 16.0 seconds
- Flash Memory
- 32 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 430 MB
- Image Processing
- Image Compression (TurboDrive), lookup table, pixel correction and lens shading correction (run-length encoding and laser profile firmware available)
- Partial Image Modes
- Pixel binning, ROI, Muti-ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 4.7
- Dynamic Range dB
- 72.9
- Gain Range
- 1x to 251x (0 dB to 48 dB)
- QE (Mono)
- 62 @530 nm
- Saturation Capacity (e-)
- 10400
- Temporal Dark Noise (Read Noise)
- 2.3
Physical
- Connector
- RJ45 (vertical locking) | SAMTEC TFM-105 type
- Digitization Bit Depth (ADC)
- 8-bit Factory Firmware, Optional 12-bit Firmware
- Dimensions [W x H x L]
- 59 mm x 44 mm x 32 mm
- Mass
- 124 g
- Operating Humidity
- 10 to 80% (no condensation)
- Operating Temperature
- -20°C to 65°C (measured at the front face of the camera)
- Opto-isolated I/O Ports
- 2 input, 3 output
- Power Consumption [Maximum]
- 10.7 W maximum PoE / 9.6 W maximum GPIO
- Power Requirements
- Power Over Ethernet (PoE) or 10 to 36 V via GPIO connector
- Sensor Format
- 1.1"
- Serial Port
- (RS-232 available on Demand)
- Storage Humidity
- 10 to 80% (no condensation)
- Storage Temperature
- -40°C to 80°C
Recommended System Configuration
- Port
- 5Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or External Camera Power Supply
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v2.0
- Warranty
- 3 years
Media gallery
Resources & Support
News
Faster GigE vision interface cameras engineered for high-resolution image capture
Read the StoryYou must be logged in to download software or firmware. Please sign in or create an account here.
Cognex Adapter for Teledyne DALSA Frame Grabbers & GigE Vision Cameras
Genie Nano 5 GigE Firmware
App Note G3-AN0010 - Run Length Encoding Algorithms for Genie Nano GigE
G3-AN0004 - Genie Nano: Comparing TurboDrive v2.0 with TurboDrive v1.0 algorithm
G3-AN0008 - Genie Nano - How to Multicast with Sapera LT
G3-AN0010 - Genie Nano GigE - Run-Length-Encoding Algorithms
Genie Nano 5G On-Semi XGS XL Declaration of Conformity
Genie Nano 5GigE Family Datasheet
Genie Nano 5GigE Material Composition Product Declaration
Genie Nano 5GigE Series User Manual
Genie Nano Family Datasheet
Genie Nano Material Composition Product Declaration