INFINITY Series Overview
The INFINITY microscope camera body provides a heat-dissipating design that reduces noise without the need for costly fans or cooling systems, and INFINITY microscope cameras are compatible with most c-mount microscopes.
FEATURES
Outstanding Value for Fluorescence Imaging
The INFINITY8-2M is the new go-to microscopy camera for routine fluorescence imaging on a constrained budget. With huge light-gathering pixels, large field of view, and low noise characteristics, this camera enables labs to have a dedicated monochrome camera for their low-light imaging requirements. And, with refresh rates of up to 96 fps at full resolution, the INFINITY8-2M provides exceptional low light sensitivity and allows for accurate imaging, even in variable lighting conditions.
Need to replace a cooled camera?
The INFINITY8-2M is budget-friendly replacement for a cooled camera of the past that is no longer working, or not compatible with today's computers and software. This ultra-sensitive camera has large pixels and a 1-inch sensor, resulting in incredible sensitivity, lightening speed, and with a large field of view – all with a never before seen price tag. Take full advantage of a 1X coupler to see more.
FLIC for optimal responsivity
FLIC (Fluorescence Illumination Image Capture) reduces read noise and allows for maximum responsivity from the INFINITY8-2M. In low light imaging, the FLIC feature increases the sensitivity of the camera while keeping noise to a minimum. This is ideal for fluorescence imaging where small details can be difficult to make out, but require short exposures.
See more of your sample
See more of your sample than any other sensor size. Take advantage of your 1X coupler to eliminate extra cost. See image for comparison.
1X C-Mount Coupler
INFINITY8-2 Monochrome Camera Reponsivity
Applications
• Low Light Fluorescence
• Immunofluorescence
• Brightfield, Darkfield, DIC/Phase techniques
• DNA Analysis
• Live Cell Imaging
• Whole Slide Imaging
• Near-Infrared DIC
• Histology, Pathology and Cytology
• Calcium/Ion Imaging
• Forensic Analysis
• Semiconductor Inspection
• Metallurgical Microscopy
• Gel Documentation
PRODUCT HIGHLIGHTS
- Monochrome CMOS sensor with 1-inch optical format
- 1.7 megapixel camera with fast frame rates of 96 fps
- Full resolution (1608 x 1104)
- Direct USB3 interface for fast image delivery and simplified connectivity
- Compact form factor
- Support for locking industrial micro USB on the back for power and control
- INFINITY ANALYZE microscopy software included with purchase. No annual license fees.
- Software support for Windows and Mac, along with third-party plugins for Image-Pro® by Media Cybernetics, and MicroManager
- Selectable 8 or 12-bit pixel data
60x Magnification with an INFINITY8-2M
Install and be Ready to Image in Minutes with the Easy-to-Use INFINITY ANALYZE 7 Application
Enjoy hassle-free use with no software license or update fees for as long as you own the camera, and reduce training time with easy-to-follow online video tutorials for Windows or MacOS. And, INFINITY ANALYZE 7 provides a consistent interface, functionality, and workflow for both Windows and Mac users.
ORDERING OPTIONS
- INFINITY8-2M — 1.7 MP digital camera
- 3-meter USB 3 Micro-B to Type-A cable Included
- La4000PAFL — GPIO cable with leads
- 5YR Protection Plan 2 — 5-Year Extended Warranty with Advanced Replacement
- Recommended coupler: 1x
INFINITY 5-Year Protection Plan
The INFINITY 5-Year Protection Plan is our commitment to providing complete peace of mind with an advanced hardware replacement assurance and a 5-year extended warranty for INFINITY microscopy cameras.
Specifications
Highlighted
- Resolution
- 1608 x 1104
- Megapixels
- 1.7
- Max Frame Rate Standard
- 96
- Sensor Model
- Sony IMX432
- Pixel Size
- 9
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Spectrum
- Mono
- Lens Mount
- C-mount
- Data Interface
- USB 3.0 (5.0 Gbps)
Features
- Acquisition Modes
- Single Capture, Fluorescence Mode, Timelapse, Video
- Exposure Control
- Manual and automatic control
- Gain Control
- Manual and automatic control
- Image Buffer
- 128 MB
- Partial Image Modes
- ROI
- White Balance
- Manual and automatic control
Performance
- C-Mount Coupler Magnification
- 1.0x C-mount coupler
- Dynamic Range
- 72
- Dynamic Range dB
- 72
- Full Well Capacity (Qsat)
- 100,400 e-
- QE (Mono)
- 76%
- Saturation Capacity (e-)
- 100400 (19200 with HCG mode)
- Temporal Dark Noise (Read Noise)
- 21.6 (4.4 e- with HCG mode)
Physical
- Connector
- USB3 Micro-B (Horizontal locking) | JST HSHR-09V-S
- Digitization Bit Depth (ADC)
- 8-bit, 12-bit
- Dimensions [W x H x L]
- 41.5 mm x 45 mm x 45 mm
- Field of View
- -
- Mass
- 108 g
- Operating Humidity
- 5 to 95%, non-condensing
- Operating Temperature
- 0 to 50 °C
- Power Consumption [Maximum]
- 2.3 W to 3.6 W
- Power Requirements
- Power over USB or 5 to 25 V via GPIO connector
- Sensor Shutter Type
- Global
Recommended System Configuration
- Accessories (Included)
- 3 m USB 3.0 cable, INFINITY ANALYZE license
- Port
- USB 3.0
Compliance & Certifications
- Compliance
- CE, FCC, RoHS, WEEE. The ECCN for this product is: EAR099.
- Warranty
- 3 years
Media gallery
Resources & Support
You must be logged in to download software or firmware. Please sign in or create an account here.
INFINITY ANALYZE 7 (Windows and Mac, Includes camera device drivers)
INFINITY ANALYZE and CAPTURE for Windows (includes camera device drivers)
INFINITY CAPTURE for Mac (includes camera device drivers)
INFINITY CAPTURE for Windows (includes camera device drivers)
Micro-Manager (3rd Party Plugin)
MATLAB Image Acquisition (3rd Party Plugin)
National Instruments LabVIEW (3rd Party Plugin)
INFINITY Driver Package (Required only for 3rd-party package supporting INFINITY cameras)
Teledyne Lumenera’s Technical Assistance Center (TAC) is fully committed to supporting its customers. A variety of effective solutions and reference materials will assist you through product development, design, integration, deployment and post-sales.
Your incoming query will directed to our TAC team where a case will be opened in our case management system and assigned to the appropriate Application Engineer (AE). Shortly, you will receive a reply email with your case number and question details, and your assigned AE will follow up with you to help resolve the issue or answer your questions.
Please complete this form and we will respond as soon as possible.
If you have screenshots or images to send us, use the convenient upload feature of the Teledyne Lumenera Transfer North Service.
If you prefer, you can send us an email to [email protected].
You can also reach our support phone line by calling (+1) 613-736-4077 (Toll Free: 1-866-636-4077) and pressing "2" at the greeting. If we are unavailable when you call, please leave us a message and we will respond promptly to inquiries.