Affordable. Powerful.
Compact and powerful
With a 45% smaller footprint than the original Linea, Power over Ethernet to simplify cabling, and supported by features like T2IR and our easy to use SaperaLT control software, Linea Lite is built for fast, easy deployment.
Bilinear Color
Our bilinear color architecture maximizes color fidelity and image quality better than anything else at its price point, and still takes advantage of the incredible speed and throughput made possible with TurboDrive.
Turbodrive™
Teledyne DALSA's proprietary TurboDrive technology allows Linea Lite to deliver its full image quality at line rates up to 50 kHz sustained (and up to 64 kHz in burst mode) with no changes to your GigE network.
Specifications
Highlighted
- Part Number
- L2-GM-04K02B-00-A
- Resolution
- 4096 x 2 (Bilinear)
- Max Line Rate
- 25 kHz
- Sensor Model
- Teledyne e2v Tetra
- Pixel Size
- 7
- Sensor Type
- CMOS
- Shutter type
- Global shutter
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- M42 x 1 mm
- Synchronization
- Image sync: Free-running, software & hardware trigger, action command | Timestamp Sync: PTP (IEEE1588)
- Data Interface
- Gigabit Ethernet 1 Gbps
- Protection
- IP30
Features
- Acquisition Modes
- Continuous / Single Frame
- Exposure Control
- Hardware trigger, programmable via camera API
- Exposure Range
- 5 µs to 2500 µs
- Flash Memory
- 32 MB non-volatile memory
- Gain Control
- Manual
- Image Buffer
- 90 MB
- Image Processing
- Image Compression (TurboDrive), gamma, lookup table, pixel correction, flat line correction and line spatial correction
- Partial Image Modes
- Pixel binning, ROI, Muti-ROI
- User Sets
- 4 user configuration sets for custom camera settings
Performance
- Dynamic Range dB
- 72
- Gain Range
- 1x to 10x
- Peak Wavelength
- 700 nm
- Responsivity
- 12 (DN8/nJ/cm2)
- Saturation Capacity (e-)
- 30000
Physical
- Connector
- RJ-45 (vertical & horizontal locking) | HD15 type (female)
- Digitization Bit Depth (ADC)
- 8-bit, 12-bit
- Dimensions [W x H x L]
- 46 mm × 46 mm × 37 mm
- Mass
- 111 g
- Non-Isolated I/O Ports
- 2 RS-422 input, 2 RS-422 output, 1 RS-422 Bi-directional
- Operating Temperature
- -10°C to 65°C (measured at the front face of the camera)
- Power Consumption [Maximum]
- 5 W
- Power Requirements
- Power Over Ethernet (PoE) or 12 to 24 V via GPIO connector
- Storage Humidity
- 15 to 85% (no condensation)
- Storage Temperature
- -20°C to 80°C
Recommended System Configuration
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or External Camera Power Supply
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v1.2
- Warranty
- 3 years
Media gallery
Resources & Support
You must be logged in to download software or firmware. Please sign in or create an account here.
Cognex Adapter for Teledyne DALSA Frame Grabbers & GigE Vision Cameras
Linea Lite GigE Firmware
Machine Vision Brochure
03-070-20176-xx Linea Lite 2k 4k GigE Mono Datasheet
03-151-20035-01 Linea Lite GigE Declaration of Conformity
Linea Lite 2k 4k GigE Mono Datasheet
Linea Lite 2k 4k GigE Mono 规格表
Linea Lite GigE Declaration of Conformity
Linea Lite GigE Series User Manual
Linea Lite GigE Series 用户手册
Linea Lite Material Composition Product Declaration