The Tetra line scan camera family delivers an excellent performance-to-cost ratio with its 2.5 GigE Vision interface, offering 2.5 times the bandwidth of GigE for data transmission over extended cable lengths. It is available in 2k, 4k, and 8k resolutions, and comes in both monochrome and color versions, with a power consumption of under 6 watts.
Preproduction
Industry-Leading Performance in a Cost-Effective Package
The Tetra line scan camera family uses Teledyne’s latest CMOS line scan sensor technology to deliver superior image quality, high dynamic range, and low power consumption, ideal for many cost sensitive applications.
Specifications
Highlighted
- Part Number
- TL-GM-08K07S-00
- Resolution
- 8192 x 1 SR
- Max Line Rate
- 75 kHz
- Sensor Model
- Teledyne DALSA
- Pixel Size
- 3.5 SR
- Sensor Type
- CMOS
- Shutter type
- Global shutter
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- M42 x 1 mm
- Synchronization
- Image sync: Free-running, software & hardware trigger, action command | Timestamp Sync: PTP (IEEE1588)
- Data Interface
- Gigabit Ethernet 2.5 Gbps
- Protection
- IP30
Features
- Acquisition Modes
- Continuous
- Exposure Control
- Hardware trigger, programmable via camera API
- Exposure Range
- 5 µs to 2500 µs
- Flash Memory
- 32 MB non-volatile memory
- Gain Control
- Manual
- Image Buffer
- 90 MB
- Image Processing
- Lookup table, pixel correction, flat line correction and line spatial correction
- Partial Image Modes
- Pixel binning, ROI, Muti-ROI
Performance
- Dynamic Range dB
- 70
- Gain Range
- 1x to 10x
- Peak Wavelength
- 650 nm
- Responsivity
- 12 (DN8/nJ/cm2)
Physical
- Connector
- RJ-45 (horizontal locking) | Hirose12 (male)
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit
- Dimensions [W x H x L]
- 62 mm × 62 mm × 50 mm
- Mass
- 297 g
- Non-Isolated I/O Ports
- 2 RS-422 input, 2 RS-422 output, 1 RS-422 Bi-directional
- Operating Temperature
- 0°C to 55°C (measured at the front face of the camera)
- Power Consumption [Maximum]
- 6 W
- Power Requirements
- Power Over Ethernet (PoE) or 12 to 24 V via GPIO connector
- Storage Humidity
- 15 to 85% (no condensation)
- Storage Temperature
- -20°C to 80°C
Recommended System Configuration
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or External Camera Power Supply
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v1.2
- Warranty
- 2 years