Based on Teledyne DALSA’s industry leading CMOS TDI technology, the award-winning Linea HS™ cameras are the most advanced TDI products in the marketplace. Linea HS offers both frontside and backside illumination to meet different application requirements. The cameras come with the next generation CLHS interface, delivering up to 8.4 Gigapixels per second over a single active optical cable.
The Next Generation of Line Scan Imaging is Here
A New Definition of Speed
The all new Linea HS delivers line rates up to an incredible 400 kHz at 32k resolution — over 5 Gpixels/sec via CLHS interface.
Equipped for the Future
Linea HS brings your imaging system the speed and power of the PCIe Gen 3 platform when paired with Xtium2. The Xtium2 CLHS PX8 supports Active Optical Cable (AOC) and industry standard CX4 cables, to acquire images at up to 8.4 GBytes/s.
Packed with Powerful Features
The Linea HS cameras deliver the highest performance available, with unique features that significantly improve detectability for many demanding applications.
Specifications
Highlighted
- Part Number
- HL-HM-32k40S-00-R
- Resolution
- 32768 x 64 ( TDI 64 stages)
- Max Line Rate
- 400 kHz
- Sensor Model
- Teledyne DALSA
- Pixel Size
- 5
- Sensor Type
- CMOS
- Shutter type
- Time Delay Integration (TDI)
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- M90 x 1 mm
- Synchronization
- Image sync: Free-running, external trigger, CLHS trigger
- Data Interface
- Camera Link HS (CX4/AOC)
- Protection
- IP30
Features
- Acquisition Modes
- Continuous
- Exposure Control
- Hardware trigger via lines rate, programmable via lines rate
- Flash Memory
- 4 GB non-volatile memory
- Gain Control
- Manual
- Image Buffer
- N/A
- Image Processing
- Lookup table, Pixel correction and Flat line correction
- Partial Image Modes
- Pixel binning, ROI, Muti-ROI
- User Sets
- 16 user configuration sets for custom camera settings
Performance
- Dynamic Range dB
- 70
- Gain Range
- 1x to 10x
- Peak Wavelength
- 690 nm
- QE (Mono)
- Peak @ 690 nm
- Responsivity
- 250 (DN8/nJ/cm2)
- Saturation Capacity (e-)
- 25000
Physical
- Connector
- CX4 | Hirose 12-pin circular (male)
- Digitization Bit Depth (ADC)
- 8-bit
- Dimensions [W x H x L]
- 97 mm x 140.5 mm x 78.6 mm
- Mass
- 1.2 kg
- Operating Humidity
- 15 to 85% (no condensation)
- Operating Temperature
- 0°C to 60°C (measured at the front face of the camera)
- Power Consumption [Maximum]
- 28 W
- Power Requirements
- 12 to 24 V via GPIO connector
- Storage Humidity
- 15 to 85% (no condensation)
- Storage Temperature
- -20°C to 80°C
Recommended System Configuration
- Port
- CLHS 7 Data Lanes (10.3 Gbps/lane)
- Power Sourcing Equipment
- External Camera Power Supply
- Required Accessories
- Lens, Cable, Host Adapter (Xtium2-CLHS PX8 CLHS frame grabber pn: OR-A8S0-HX870)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- CameraLink HS v1.0
- Warranty
- 2 years
Media gallery
Resources & Support
Article
Photonics Spectra Article - Multifield Imaging Enhances Detectability at Speed
Read the Story
News
Teledyne DALSA’s 16k multifield TDI camera captures multiple images in a single scan
Read the Story
News
Teledyne DALSA’s 32k TDI camera delivers the industry’s highest resolution in line scan imaging
Read the Story
Machine Vision Brochure
Application Note - Configuring Super Resolution Mode for Linea HS 32k TDI Camera
Application Note - Linea TDI Color and Multifield Alignment
Linea HS & ML Camera link HS CX4 9K, 13K, 16K & 32K drawing and 3D model
Linea HS 32k Datasheet
Linea HS 8k EMC Declaration of Conformity
Linea HS Series 32k Super Resolution
Linea ML HS Material Composition Product Declaration
Related Products
Xtium2 Family
PCI Express Gen3 Platform
- Supports machine vision camera interface standards: GigE Vision, CLHS, CoaXpress, CameraLink
- Zero CPU usage, ready to use images
- On-board image processing capability